Moving out is not just about relocating; it is about leaving your rental in top condition to secure your bond. A spotless property, reflects responsibility, organisation and care. The landlord looks for all of these during the final inspection. From gleaming countertops to dust free skirting boards, every detail counts when it comes to making a good final impression.
This article will provide you with room by room vacate cleaning checklist. With this, you will learn how to clean every room to inspection standards and avoid last minute panic. Whether you are managing it solo or relying on expert vacate cleaning Perth services; these practical tips will help you in restoring your home, to its original shine and pass your inspection with confidence.
- Kitchen: Deep Cleaning to Remove Grease and Grime
- Bathroom: Achieving a Hygienic and Sparkling Finish
- Bedrooms: Dusting, Detailing and Carpet Care
- Living Room: Creating a Clean and Welcoming Space
- Laundry: Ensuring Every Surface Is Fresh and Tidy
- Outdoor Areas: Presenting a Well Maintained Exterior
- Fixtures and Fittings: Perfecting the Small but Important Details
- Walls and Floors: Restoring Surfaces to Their Original Condition
- Final Inspection: Checking Every Room Before Handover
- Infographic for room by room vacate cleaning checklist
- Wrapping Up
1. Kitchen: Deep Cleaning to Remove Grease and Grime
The kitchen is one of the most critical areas during a final inspection. Landlords and property managers pay close attention to it since it is often the most used and most stained part of the home. Start by cleaning the oven inside out. Remove racks and soak them in warm, soapy water, then scrub the oven walls with baking soda paste to remove grease and grime. Don’t forget the stovetop; clean the burners, knobs and metal grates thoroughly.
Next, move on to the rangehood and exhaust fans. These collect grease over time; so a degreaser will come in handy. Wipe down all benchtops, tiles, splashbacks, and cabinets, both inside and out. Empty the fridge and thoroughly clean it by removing shelves and washing out every nook. Finally, brush and clean the floor to ensure it is pristine.
2. Bathroom: Achieving a Hygienic and Sparkling Finish
Bathrooms are another area, where property managers will not compromise. Start with the shower, scrub the tiles, clean the grout and remove soap scum and limescale from the glass doors. Vinegar and baking soda can work wonders here. Then focus on the bathtub; making sure that there are no stains or soap residues left behind.
Clean the toilet bowl, seat, and cistern using a disinfectant cleaner. Wipe the mirrors, vanity, and sink, making sure any watermarks are removed. Don't ignore minor details like towel racks, exhaust fans, and light fixtures. Finally, wipe the floor and inspect the drains for blockages or buildup. A sparkling bathroom will leave a strong impression during inspection.
3. Bedrooms: Dusting, Detailing and Carpet Care
Bedrooms may appear to be simple to clean; but they are full of hidden dust spots that might result in deductions if overlooked. Start by eliminating cobwebs and dusting the ceiling corners. Clean the lighting fixtures, fans and air vents. Wipe clean the walls and skirting boards to eliminate scuff marks and dust.
Next, focus on wardrobes and cupboards. Remove every item, to clean the inside and make sure that, the doors slide or close smoothly. Clean the windows and tracks thoroughly; they frequently accumulate dirt and dead insects. Finally, vacuum or steam clean the carpets, depending on your lease agreement. Professional carpet cleaning is usually required for Perth residences, so double check your lease.
4. Living Room: Creating a Clean and Welcoming Space
Your living room reveals how well you maintained the property throughout your stay. Begin by dusting the ceiling fans, lights, and curtains. Wash the windows, sills and frames completely, leaving no streaks. If your rental includes curtains; determine whether they should be washed or dry cleaned.
Move on to walls, wipe away fingerprints, stains, or smudges using a damp cloth and mild detergent. Vacuum or mop the floor, depending on the surface. For carpeted areas, a professional clean might be required. Do not forget to clean switches, doorknobs, and handles; they are easy to miss but very noticeable during vacate cleaning Perth inspection. A well dusted and neatly arranged living area gives off a great impression right away.
5. Laundry: Ensuring Every Surface Is Fresh and Tidy
Many tenants ignore the laundry, expecting it will not be thoroughly scrutinised which is a mistake. Begin with the sink and taps; removing any rust or detergent residue. Clean behind and beneath the washing machine and dryer to remove lint and dust.
If your laundry includes cupboards or shelves, clean them both inside and out. Make sure there is no remaining detergent residue or moisture. Check the walls and flooring, for mould and water stains and clean as needed. Then at last, mop the floor to eliminate any markings or dust. With proper attention to detail; even a small laundry area may appear pristine.
6. Outdoor Areas: Presenting a Well Maintained Exterior
If your property has a balcony, patio, or backyard, they will also be inspected. Sweep away leaves, dust, and cobwebs. Give the outdoor furniture a quick wipe down. Clean sliding door tracks and glass panels.
For garden areas, mow the lawn, trim bushes, and remove weeds. Make sure bins are emptied and cleaned. If you have a garage, then sweep it and try to remove any oil spots. Keeping your outdoor spaces clean, gives a good impression and shows that you care about the property.
7. Fixtures and Fittings: Perfecting the Small but Important Details
Small fixtures and fittings are usually overlooked during cleaning but they can make or break an inspection. Check all light switches and power outlets for smudges. Wipe down the door handles, hinges and frames. Clean mirrors and glass surfaces, to a streak free finish.
Inspect windows thoroughly, clean both the glass and the tracks. Dust blinds and wipe curtain rods. Do not forget air conditioning units clean the filters and vents to ensure they are dust free. These small but crucial touches show you have done a thorough job, leaving no reason for complaints.
8. Walls and Floors: Restoring Surfaces to Their Original Condition
Walls and floors are among the first things noticed during an inspection. Go over walls to remove any marks or scuffs. Magic erasers or mild soapy water can work wonders without damaging paint. Dust and wipe skirting boards throughout the house; they are commonly missed but easily inspected.
For hard floors, sweep, vacuum and mop thoroughly. Use the proper cleaning for your flooring type; tiles, laminate or wood. Pay special attention to corners and under furniture where dust accumulates. Clean, streak free floors are required for an inspection ready property.
9. Final Inspection: Checking Every Room Before Handover
Before handing back the keys, do a walkthrough of every room with your checklist. Look for areas you might have missed light switches, behind doors, inside cupboards, or under furniture. Make sure all personal belongings are removed, bins are empty, and every surface is spotless.
If you have hired professionals for vacate cleaning Perth, it is still wise to inspect their work before the final handover. A careful double check ensures there are no last minute surprises and that your property manager will have no grounds to withhold your bond.
Infographic for room by room vacate cleaning checklist
Wrapping Up
Vacate cleaning is not just about dusting and mopping; it is about precision, patience, and attention to detail. Each room demands its own level of care, and skipping even the smallest task can cost you your bond. By following this checklist, you can ensure your property looks as clean as the day you moved in.