
Moving out of a rental property means leaving behind every space in spick-and-span condition. Among the various rooms in the property, bathrooms receive a lot of scrutiny during inspection. The reason for this, bathrooms can be breeding ground for germs and bacteria and have the potential to cause the property environment to deteriorate, affecting its future renting prospects.
Therefore, property inspectors are very strict while inspecting the bathroom. Even a minute stain or leftover grime can lead to deductions from your bond deposit, making it essential to leave behind a spotless bathroom.
It sounds quite challenging to achieve this high standard of cleanliness in the bathroom, but don't worry. We have your back! In this article, some practical tips on cleaning will be given to ensure you have an immaculately clean bathroom that can pass bond inspections with flying colours. Whether you choose to do the cleaning yourself or opt for professional vacate cleaning Perth, the goal is to ensure no corner is left unchecked.
1. Start with a Thorough Inspection
Before beginning the cleansing process, take stock of the bathroom. Identify areas that will probably require more effort – stubborn stains, soap scum, mould and other problem areas will have to be dealt with accordingly. This will help you plan the rest of your cleaning process and help you to be more efficient. This further ensures that you're not missing anything.
2. Gather the Right Tools and Products

Effective bathroom cleaning requires the correct set of tools and products. Some of the essentials that you’ll need are:
- A sturdy scrub brush
- Microfiber Cloths
- Baking Soda
- White Vinegar
- Bleach or Mould remover
- Tile and Grout Cleaner
- Glass Cleaner
Having these items handy and close to you will help save time and ensure that you’re prepared for any challenge – be it removing soap scum or cleaning the hard-to-reach areas.
3. Focus on Tile and Grout
Dirty tiles and gout lines are one of the common reasons for deposit deductions. Whether you’re opting to clean it yourself or hiring the services of vacate cleaning in Perth, it’s essential to give them a through clean. If you’re tackling the issue yourself, use a specialised tile cleaner or a mixture of baking soda and water to scrub the tile. For the grout lines, a toothbrush that is dipped in vinegar will work wonderfully. Rinse the areas thoroughly and check for discolouration. Repeat the process if necessary.
4. Eliminate Mould and Mildew
Mould and mildew don’t just look unsightly; they also pose a serious health threat. To remove them, exercise caution and wear a mask before you start cleaning. You don’t want the mould spores entering your respiratory tracks. After donning this safety gear, use a bleach solution or a commercial mould remover to clean up the affected areas. Inspect the corners, ceiling edges and around the shower head as well. Taking the time to ensure that the bathroom is free of mould is important for passing the rental inspection.
5. Descale and Polish the Fixtures
Water stains and Limescale on taps, showerheads and other fixtures are a major “NO”. It can ruin the look of the bathroom and give it an unclean feel. Use a descaling solution or vinegar to remove any build-up by applying it directly on the affected area. Let the solution sit for 10-15 minutes before scrubbing it gently using a soft sponge or brush to loosen the deposits. Finally, polish the fixtures using a microfiber cloth for a streak-free finish.
6. Deep Clean the Shower and Bathtub
The shower and bathtubs are a focal point of the bathroom. Hence, you need to clean them carefully. Scrub them using a powerful cleaner (test it out on an inconspicuous area first) to remove the soap scum and stains. Rinse the areas thoroughly after this to prevent any residue from staying behind. Make sure that the shower curtain or screen is spotless, too. If you have a glass screen in the bathroom, use a vinegar solution for cleaning and then dry it out using a microfiber cloth. Services like Vacate Cleaning in Perth often pay special attention to cleaning the toilet, as this is one of the most important areas for maintaining hygiene.
7. Sanitise the Toilet
The toilet is another crucial area of focus. To properly clean it, use a toilet-specific cleaner for the inside of the bowl, letting it sit for a couple of minutes to break down stains and bacteria. Use a brush to scrub the bowl thoroughly, including under the rim. Don’t forget to clean the outside, including the base and behind the seat, by using an all-purpose cleaner and a lint free cloth. Finish by wiping the area dry to prevent water stains.
8. Clean the Sink Vanity and Ventilate Properly
Sinks and vanities are prone to accumulating toothpaste scum, watermarks and grime. To clean this area, use an all-purpose cleaner to scrub the surfaces, paying special attention to the edges and corners. Clean the mirror above the sink with a streak free glass cleaner, being sure to leave no smudges or fingerprints behind.
Another important but overlooked aspect of a bathroom is the ceiling and ventilation shafts or fans. These areas, too, can accumulate dirt, so be sure to dust and wipe them down. Remove any cobwebs to ensure proper airflow. A well-ventilated and odour free bathroom can leave a positive impression during the inspection.
How to Clean Your Bathroom During a Bond Clean?

Wrapping Up
Before concluding the cleaning, review the space to ensure you’ve missed nothing. If there are any broken fixtures or loose fittings, repair and replace them as needed. For the finishing touch, add a bit of air freshener to eliminate odours. This way, you will be able to achieve a spotless bathroom. But if you feel the task to be too much for you, don’t hesitate to call on professional help. Regardless of what you choose, these tips will help you in getting your bond back.